Home Page
Your best source for Gaskets, Durlon®, Parker, TFE, PTFE, O-Rings, Molding, Gore-Tex®, Perfluoroelastomers, Graphite, Sponge, Heat Exchangers, Hypalon®, Rubber, Packing, Seals, TFE, J.M. Clipper/Leader®, Rubber, Nitrile, EPDM, Kalrez®, Sealon™, Spiralwounds, Ring Joints, Silicone, Neoprene, Viton®, Flexible Graphite Sheet, Barge Sealing Supplies, Butterworth Gaskets, Marine Gaskets and Seals, Ultralon™, Waterjet Services and More!


Gore-Tex®


Gasket Tape
GORE-TEX® gasket tape is a flat, thin, form-in-place gasketing material. It can be used to form a full-face strip-type gasket under 2 inches (50.8 mm) wide for smooth, flat, rectangular sealing surfaces or for narrow sealing surfaces. It easily compresses into an extremely thin profile, and requires minimal compression to seal. GORE-TEX® gasket tape is an ideal choice when compressed thickness is critical.
Available in a variety of widths and thicknesses, this "sheet gasketing on a roll" can be shaped easily and quickly, without precutting, to fit any ring-type or full-face gasket application. Gore-Tex® gasket tape can be used anywhere you need a flat, thin, engineered gasket.
Key Features
  •  Made from 100% multi-directionally expanded PTFE
  •  Chemically inert
  •  Temperature resistant
  •  Highly conformable
  •  Dimensionally stable
  •  Resists creep & cold flow
  •  1/16" & 1/8" thicknesses replace sheet gasketing
  •  Easy to install
Key Benefits
  •  Installs quickly around shaft assemblies
  •  Lowers inventory, delivery and installation costs
  •  Unaffected by virtually all common chemicals
  •  Superior sealing reliability & longer gasket life
  •  Lower total sealing cost

Material: 100% expanded PTFE
Temperature Range: -450° F to 600° F (-268° C to 315° C)
Operating Pressure: Vacuum to 3,000 psig (200 bar)
Chemical Resistance:
Resistant to all common chemicals in 0-14 pH range, except molten alkali metals and elemental flourine

Gore Product names are trademarks of W.L. Gore & Associates, Inc.

GORE-TEX® Series 300 gasket tape helps to achieve greater sealing efficiencies with large steel piping and equipment. Unlike sheet gasketing, it can be quickly formed in place, installs easily, and reduces expensive material scrap. Conformable and highly compressible, this tape forms a very tight seal. Strong multi-directionally expanded PTFE fibers give excellent creep resistance for a long lasting seal that withstands virtually any chemical process. It is an ideal choice when sealing large diameter flanges.
GORE-TEX® Series 600 gasket tape is a form-in-place gasket for glass-lined equipment that guards against premature gasket failure. Unlike PTFE envelope gaskets, it will not degrade due to chemical attack, and will ensure a tight and long-lasting seal. The entire gasket is chemically inert, so the user will not experience the sealing problems associated with aggressive media or outside environment. It conforms to the imperfections common in glass-lined flange surfaces, while maintaining dimensional stability for superior sealing reliability.







Ameraflex Sealing Products Co., Inc.
317 Georgia Avenue  •  Deer Park, Texas  77536
1-800-522-7325  •  (281)476-8500  •  FAX(281)476-8520
e-mail


Copyright © by Ameraflex Sealing Products Co., Inc. All Rights Reserved
Another Website